Commit 4f5d1f92 authored by Beck-Sisyphus's avatar Beck-Sisyphus
Browse files

start to remove codes

parent 67e45d49
No preview for this file type
No preview for this file type
December_6_14 Arduino Test
Prints serial input to console and changes pin 13 (LED) value
on input.
// Stores whether or not the pin is at high value
boolean isHigh;
// the setup function runs once when you press reset or power the board
void setup() {
// initialize digital pin 13 as an output and set to low
pinMode(13, OUTPUT);
digitalWrite(13, LOW);
isHigh = false;
// Starts serial communication with baud rate 115200
// the loop function runs over and over again forever
void loop() {
// Checks if the arduino has recieved serial input
if(Serial.available() > 0) {
// Read in serial input
char value =;
// Print out the value read to the console
Serial.print("Read: ");
// Switches the value of pin 13 (LED) between high and low
if(isHigh) {
digitalWrite(13, LOW); // turn the LED off by making the voltage LOW
isHigh = false;
} else {
digitalWrite(13, HIGH); // turn the LED on (HIGH is the voltage level)
isHigh = true;
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment